咨询热线:

400-0733-598

深圳市创盈时代科技博乐彩票

联系人:汪菲菲

电话:0755-81779389

手机:18819037886

QQ:2764836233

Email:chytime@chytime.com

地址:深圳市宝安区沙井街道沙头工业区裕民路22号二楼西面

您所在的位置:博乐彩票 > 技术文库 > 点胶机技术文章 >

发布时间:2018-04-28 15:26:12   来源:本文搜集于网络,由硅胶点胶机厂家创盈时代整理并发布,欢迎转载    点击:

硅胶点胶机胶水阻塞的情况下,自动点胶机厂家认为此种情形主要因过多的湿气或重复运用过的瞬间胶,应保证运用新鲜的瞬间胶,将管路以未含湿气的Aceton丙酮清洗过。运用的空气应断定完枯燥且于厂内空压与胶阀体系间加装过滤器。
When the glue is blocked by the silicone glue dispenser, the automatic glue machine manufacturer believes that this situation is mainly due to excessive moisture or repeated use of the instant glue. We should ensure the use of fresh instant glue and clean the pipeline with Aceton acetone without moisture. The air should be exhausted and the filter should be installed between the plant's air pressure and the rubber valve system.

硅胶点胶机

硅胶点胶机点胶时如果出现断胶,可以通过以下方法判断其原因:
If the gel dispenser breaks glue when dispensing, it can be determined by the following methods:

一:检查胶水是不是有问题,比方胶水中含有气泡,有颗粒沉淀物之类等,这种情况下会使点胶机发生点胶断胶的问题;
One: whether to check the glue is not a problem, for example, the glue contains bubbles, there are granular sediment and so on. In this case, the glue dispenser will break glue.

二:点胶控制器是否作业正常,因其作业的不正常或许其自身性能的缺乏,也会呈现点胶断胶的问题;
Two: whether the dispensing controller is working normally, because of its improper operation or lack of its own performance, it will also present the problem of glue breaking and glue breaking.

三:如果产品使用的是UV胶,勿直接增加UV胶于压力筒旧有的UV胶上。先将原有UV胶放掉,再胶UV胶倒入空的压力筒。压力筒内的UV胶往往通过一段时间后会发生气泡而形成出胶不稳定。
Three: if the product is using UV glue, do not directly add UV glue to the pressure vessel's old UV glue. First, the original UV glue is released, then the rubber glue is poured into the empty pressure cylinder. The UV glue in the pressure cylinder often produces bubbles after a period of time.

深圳市创盈时代科技博乐彩票是一家专注于平台点胶机,落地式点胶机,视觉点胶机,非标自动化设备的研发生产和销售于一体的国家高新技术点胶机厂家。

本文关键字:硅胶点胶机

原文地址:http://www.bananacanon.com/news/djjs/1726.html

本文由www.chytime.com 深圳创盈时代科技博乐彩票 自动点胶机整理,欢迎转载,转载时请标明出处。

上一篇:自动点胶机与人工点胶有哪些不一样的地方
下一篇:如何保障自动点胶机的点胶精度