博乐棋牌

咨询热线:

400-0733-598

深圳市创盈时代科技有限公司

联系人:汪菲菲

电话:0755-81779389

手机:18819037886

QQ:2764836233

Email:chytime@bananacanon.com

地址:深圳市宝安区沙井街道沙头工业区裕民路22号二楼西面

您所在的位置:博乐棋牌 > 技术文库 > 焊锡机技术文章 >

USB自动焊锡机操作要注意哪些事项

发布时间:2017-12-18 10:12:05   来源:本文搜集于网络,由自动焊锡机厂家创盈时代整理,欢迎转载    点击:

自动焊锡机是电子企业生产中常见的一种设备之一,对于生产数据线的企业来说自动焊锡机可以进行USB数据线、电源线等线材的焊锡,行业里也叫做USB自动焊锡机,它节省了企业的人工成本,同时也保证了焊线成品的质量。那么USB自动焊锡机操作要注意哪些事项呢?接下来焊锡机厂家为你来解答这一问题。
Automatic soldering machine is electronic enterprise is a common one of the devices, for the production line of the enterprise data automatic soldering machine can solder USB data cable, power line wires, the industry is also called the USB automatic soldering machine, it saves the labor costs of enterprises, but also to ensure the quality of welding wire products the. So what do you need to pay attention to USB automatic soldering machine operation? Next, the soldering machine manufacturer answers this problem for you.
USB自动焊锡机

USB自动焊锡机操作要注意哪些事项

1.焊点不能过于饱和,应该处于三四点的中间,不然锡点过大就容易和旁边的焊点相互断路,锡要与元件脚呈小半圆形,这样焊出线路板整齐,也是最良好的。
1。 spot not too saturated, should be in the middle of three or four points, or too large to tin point and next to each other to a tin solder breaker, half circular and element feet, so the welding circuit board neatly, is also the most good。

2.USB自动焊锡机引线不能太细太长,焊接时的电压降不得大于初始电压的5%,而且操作时要戴手套,防护眼镜等。USB自动焊锡机在使用过程中不要将烙铁嘴放到海棉上清洁,只需将烙铁嘴上的锡搁入集锡硬纸盒内,这样保持烙铁嘴之温度不会急速下降。
2.USB automatic soldering machine lead wire can not be too thin and too long, the voltage drop in welding should not be more than 5% of the initial voltage, and the operation should wear gloves, protective glasses and so on. USB automatic soldering machine used in the process should not be put on the sponge iron mouth clean, only need to be put into the mouth of the iron tin tin Set hard paper box, so keep the temperature not the rapid decline in iron mouth.

3。USB自动焊锡机每天用完后,先清洁,再加足锡,然后马上切断电源,这样有助于机器的使用寿命增长。
3。USB automatic soldering machine is used out every day, clean, add tin, and then cut off the power immediately, which helps to increase the service life of the machine。

USB自动焊锡机的优点

1、节省时间,降低作业员的劳动强度。
1, save time, reduce the worker's labor intensity.

2、USB自动焊锡机焊接速度快,减少材料的浪费。
2, USB automatic soldering machine has fast welding speed and reduces the waste of material.

3USB自动焊锡机容易上手,减少焊接人员的培训时间。
3, USB automatic soldering machine is easy to handle, reducing the training time of the welding personnel。

以上就是关于USB自动焊锡机操作要注意哪些事项的解答,深圳市创盈时代科技是荣获国家高新技术企业称号的焊锡机厂家,专注于双Y双头焊锡机、双头三头焊锡机、三轴四轴焊锡机、激光焊锡设备整体解决方案领导者,为你提供整体点胶解方案,欢迎来电咨询。

原文地址:http://www.bananacanon.com/news/hxjs/1689.html

本文关键字:USB自动焊锡机操作要注意哪些事项

本文由www.bananacanon.com 深圳创盈时代科技有限公司 自动点胶机整理,欢迎转载,转载时请标明出处。

上一篇:激光焊锡机在3C电子行业的应用
下一篇:自动焊锡机的核心结构由哪些部分组成

凤凰棋牌 凤凰棋牌app 众鑫棋牌 凤凰棋牌app 六合宝典 众博棋牌 博乐棋牌 凤凰棋牌app下载 众博棋牌 凤凰棋牌游戏