咨询热线:

400-0733-598

深圳市创盈时代科技博乐彩票

联系人:汪菲菲

电话:0755-81779389

手机:18819037886

QQ:2764836233

Email:chytime@chytime.com

地址:深圳市宝安区沙井街道沙头工业区裕民路22号二楼西面

您所在的位置:博乐彩票 > 技术文库 > 焊锡机技术文章 >

发布时间:2018-01-03 15:42:08   来源:本文搜集于网络,由自动焊锡机厂家创盈时代整理发布,欢迎转载    点击:

很多企业采购人员由于只是按照上面的采购订单完成产品购买,所以有可能他们对所要采购的产品并不是很了解,就拿焊锡机来说,过来咨询的客户对于自动焊锡机的了解不多,都会有各种疑问,比如不同的焊锡机,焊锡方式是不一样的,一般来说自动焊锡机主要有点焊、拖焊、压焊三种焊锡方式,要根据产品的特性决定焊锡方式。
Just because many enterprises purchasing personnel in accordance with the above purchase orders to complete the product purchase, so they may have to purchase the product is not very understanding, take the soldering machine, come to consult customers for automatic soldering machine do not know much, there will be a variety of questions, such as different soldering machine, soldering is not the same, generally automatic soldering machine mainly welding welding, pressure welding, drag three solder, solder to decide according to the characteristics of products.
自动焊锡机

自动焊锡机的压焊
Pressure welding of automatic soldering machine
 

压焊主要是焊点测试要求拉力,且焊点分布较均匀,没有插件的产品,可以使用压焊,若用波峰焊或者回炉焊对于有拉力要求的产品最好是使用自动焊锡机焊锡,这样对于有拉力要求的客户是比较有保障的。
Pressure welding is mainly welding test requirements of tension, and joint distribution is uniform, no plug-in products can use pressure welding, soldering or welding if recycled for Tensile Requirements of the product is the best use of automatic soldering machine for soldering, this tension requirements of customers is more secure.
 

自动焊锡机的拖焊
Tow welding of automatic soldering machine
 

拖焊主要是焊点分布均匀且焊点间距大于0.1mm ,此类产品需要固定插件,如果两个焊点直接的间距少于0.1mm,不需要固定插件的,若使用拖焊会导致产品连锡的问题,这类产品使用波峰焊或者回炉焊速度最快。自动焊锡机拖焊的好处就是可以节省时间,提高效率。
Drag the main welding solder joint is uniform distribution and spot spacing is greater than 0.1mm, such products need to be fixed plug, if two solder joints direct spacing is less than 0.1mm, without a fixed plug, if the use of drag soldering will lead to products even tin, this kind of product used in wave soldering or welding furnace to the fastest. The advantage of the tow welding of an automatic soldering machine is to save time and improve efficiency.
 

自动焊锡机的点焊
Spot welding of automatic soldering machine
 

使用点焊的产品主要是焊点分布不均匀或者焊点要求的饱满度高,还有另外一种情况产品的焊点分布均匀,但是插件需要固定,就需将其中的一个点固定好再用焊锡,这种情况使用点焊效率高。使用点焊的产品较多,因为很多产品的焊点分布都不均,而且对镀锡都有不一样的要求。
The use of spot welding is the main product of the solder joint distribution is not uniform or solder joint requirements plumpness high, there is also a solder joint product distribution, but requires that needs to be fixed, one point fixed with solder, this kind of situation the use of high efficiency welding. There are more products using spot welding, because the distribution of solder joints in many products is uneven, and there are different requirements for tin plating.
 

深圳市创盈时代科技是荣获国家高新技术企业称号的焊锡机厂家,专注于双Y双头焊锡机、双头三头焊锡机、三轴四轴焊锡机、激光焊锡设备整体解决方案领导者,为你提供整体点胶解方案,欢迎来电咨询。
 

原文地址:http://www.bananacanon.com/news/hxjs/1695.html
 

本文关键字:自动焊锡机焊锡方式

本文由www.chytime.com 深圳创盈时代科技博乐彩票 自动点胶机整理,欢迎转载,转载时请标明出处。

上一篇:自动焊锡机的核心结构由哪些部分组成
下一篇:自动焊锡机锡丝的选择和使用技巧