博乐棋牌

咨询热线:

400-0733-598

深圳市创盈时代科技有限公司

联系人:汪菲菲

电话:0755-81779389

手机:18819037886

QQ:2764836233

Email:chytime@bananacanon.com

地址:深圳市宝安区沙井街道沙头工业区裕民路22号二楼西面

您所在的位置:博乐棋牌 > 技术文库 > 焊锡机技术文章 >

如何正确的选择USB自动焊锡机的传感器?

发布时间:2018-01-24 16:09:05   来源:本文搜集于网络,由USB自动焊锡机厂家创盈时代整理并发布,欢迎转载    点击:

随着自动化行业的不断发展,越来越多线材厂家选择了USB自动焊锡机来进行线材数据线的焊锡,自动焊锡机能够高效率的焊锡USB数据线、AC/DC圆线扁线等线材。而传感器又是焊锡机上一个很重要的部件,特别是焊这个线材的时候,一个好的传感器不仅可以大大提高产能,还可以使焊锡机的故障率降到最低。
With the continuous development of automation industry, more and more wire manufacturers choose USB automatic tin soldering machine to solder wire data line. Automatic solder machine can efficiently solder solder USB data line, AC/DC round wire and flat wire. Sensor is also a very important part of soldering machine. Especially when welding wire, a good sensor can not only greatly increase productivity, but also make the failure rate of soldering machine to a minimum.
自动焊锡机

USB自动焊锡机常用的三种传感器:
Three kinds of sensors commonly used in USB automatic soldering machine:

1.电弧传感器:通过自身直接获取焊缝位置得偏差信号,不用在焊枪上加装其余部件,所以灵活性能较为优异,适用于要求较低的自动化产品上。利用自身电参数的动静态变化作为特征信号,在策略控制下实现水平高低两个方向的追踪。一般针对于具有对称形状的坡口焊缝为主,对于定位焊点这种特殊状态下较难识别。
1., arc sensor: get the deviation signal directly by obtaining the weld position directly, without adding other components on the welding torch, so the flexibility performance is excellent, and it is suitable for the automatic products with lower requirements. The dynamic and static change of its own electric parameters is used as the characteristic signal, and the two directions of the level are traced under the control of the strategy. It is mainly aimed at the groove welds with symmetrical shape, which is difficult to identify in this special state.

2.机械接触式传感器:主要依靠导轮或导杆在焊炬前方检测焊缝位置,焊缝形状对导杆或导轮的强制力来源于导向,把焊缝偏差信息反馈到检测器内,以达到跟踪焊缝的效果。其结构简单,操作容易,成本低且不会受到电弧烟尘、飞溅因素等干扰,介质与其信息量较少,在自动焊锡机当中,主要和传感器搭配使用来完成操作流程,通常不会独立采用。
2。, the mechanical contact sensor mainly depends on the guide wheel or guide rod to detect the weld position in front of the torch, and the force of the weld form on the guide rod or guide wheel comes from the guidance, and the welding deviation information is sent back to the detector to achieve the effect of tracking the weld。 Its structure is simple, operation is easy, cost is low, and it will not be interfered by arc smoke and dust and splashing factors。 The medium and its information are few。 In automatic tin soldering machine, it is mainly used with sensors to complete the operation process, usually not independently。

3.传感器:未来传感器发展的必然趋势,其信息量丰富,适应能力强,在计算机处理下,能够充分发挥其智能化,不足点在于其价格昂贵,处理信息时间过长,实时效果差,存在一定的限制性。这种CCD传感器尽管获取到的图像信息量较少,不过都是重要的数据,满足智能化操控的要求。
3.CCD visual sensor: the inevitable trend of the future development of the sensor, the rich amount of information, strong ability to adapt, in computer processing, can give full play to their intelligence, lack of it is that it is expensive, real-time information processing time is too long, the effect is poor, there are certain limitations. Although the CCD sensor has less image information, it is important data to meet the requirements of intelligent manipulation.

深圳市创盈时代科技是荣获国家高新技术企业称号的焊锡机厂家,专注于双Y双头焊锡机、双头三头焊锡机、三轴四轴焊锡机、激光焊锡设备整体解决方案领导者,为你提供整体点胶解方案,欢迎来电咨询。

原文地址:http://www.bananacanon.com/news/hxjs/1701.html

本文关键字:USB自动焊锡机 传感器

本文由www。chytime。com 深圳创盈时代科技有限公司 自动点胶机整理,欢迎转载,转载时请标明出处。

上一篇:自动焊锡机锡丝的选择和使用技巧
下一篇:焊锡机日常操作要领介绍

六合宝典 博乐棋牌 众鑫棋牌 凤凰棋牌手机版 六合宝典 凤凰棋牌手机版 博乐棋牌 凤凰棋牌 六合宝典 凤凰棋牌