博乐棋牌

咨询热线:

400-0733-598

深圳市创盈时代科技有限公司

联系人:汪菲菲

电话:0755-81779389

手机:18819037886

QQ:2764836233

Email:chytime@bananacanon.com

地址:深圳市宝安区沙井街道沙头工业区裕民路22号二楼西面

您所在的位置:博乐棋牌 > 技术文库 > 焊锡机技术文章 >

自动焊锡机治具会出现哪些问题?

发布时间:2018-05-04 15:39:25   来源:本文搜集于网络,由自动焊锡机厂家创盈时代整理发布,欢迎转载    点击:

目前越来越多的行业都离不开焊锡机了,特别是在3C行业中全自动焊锡机运用广泛。但是操作不当,设备就会出现各种各样的小问题,今天我们就来聊一聊焊锡机的治具容易出现的几个问题以及解决方案。
At present, more and more industries are inseparable from the soldering machine, especially in the 3C industry, the automatic solder machine is widely used. But the improper operation, the equipment will have a variety of small problems, today we will talk about a few problems and solutions to the welding machine.

自动焊锡机

1、自动焊锡机底座自身定位误差
Self positioning error of the base of automatic soldering machine

以往采用两个定位治具是放不下去的,如果强制性操作,一来一回,会在过程中导致Y轴移动产生误差;如今采用一个定位销,尽管问题解决了,不过新问题又出现了,目前采用一个定位销定位,因此定位不够准确,导致在每次往底盘上放置治具时,都会产生放置误差。
Two positioning tools in the past can not be put down, if the mandatory operation, once a return, will lead to the Y axis movement in the process of error; now use a positioning pin, although the problem has been solved, but the new problem appears, the current use of a positioning pin positioning, so the positioning is not accurate, leading to each time When placing jig on the chassis, the placement error will occur.

2、治具间的组合公差
the combination tolerance between the fixtures

这是目前影响焊接质量的最大问题,由于在制造治具时受到机器精度,人为技术方面的影响,每个治具的尺寸都不能完全一致,这就存在治具的组合公差,因此同一个治具放置在不同通道时就会产生误差,事实证明这是影响焊接质量最为严重的误差之一。
This is the biggest problem that affects the welding quality at present. Because of the machine precision and the artificial technology, the size of each tool can not be exactly the same. There is a combination tolerance of the fixture, so the error will be produced when the same tool is placed in different channels. It is proved that this is the influence of welding. One of the most serious errors.

3、后期维护艰难
difficult to maintain in the later period

由于需要较高的焊接精度,在所有的误差消失后,在治具的使用过程中会产生新的焊接误差,比如人为装入误差,镍片在焊盘孔中的倾斜误差,以及在使用过程中治具的磨损,维修擦洗打磨产生的新误差。
Due to the need for high welding precision, new welding errors will be produced in the use of the tool after all the errors are lost, such as artificial loading error, the tilt error of the nickel plate in the weld plate hole, and the wear of the fixture during the use, and the new error caused by the maintenance and scrubbing.

4、焊头的锡量滞留误差
tin retention error of welding head

介于在焊接时,既要焊接大点,又要焊接小点。事实证明焊接大点时与焊接小点时焊头的锡所滞留量是不同的,点焊与拖焊所滞留量的又不一样。焊头上的锡毫无疑问会流到下一个焊点,在焊接大点时焊头上的锡滞留量也许不足为虑,但是焊接小点时锡滞留量的多少不确定性将对小点锡量覆盖的多少造成较大的影响。因此焊头的锡量滞留误差对焊接所造成的因素,将直接影响焊接良率。
When welding, it is necessary to weld large points and weld small points。 It is proved that the amount of solder retained in the welding head is different when the welding point is larger than the welding point, and the amount of spot welding and trailing welding is different。 Tin on the soldering head will no doubt flow to the next solder joint, and the tin retention on the head may not be considered at large welding points, but the uncertainty of the amount of tin retention at the solder joint will have a greater impact on the small amount of tin coverage。 Therefore, the solder joint error caused by solder joints will directly affect the welding yield。

更多关于焊锡机的小知识请关注焊锡机厂家创盈时代,我们是一家专注于双Y双头焊锡机、双头三头焊锡机、三轴四轴焊锡机、激光焊锡设备整体解决方案的高新技术企业。

原文地址:http://www.bananacanon.com/news/hxjs/1727.html

本文关键字:自动焊锡机治具

本文由www.bananacanon.com 深圳创盈时代科技有限公司 自动点胶机整理,欢迎转载,转载时请标明出处。

上一篇:焊锡机烙铁头不上锡的应对措施
下一篇:焊锡机的应用领域包含哪些方面

博乐棋牌 众博棋牌 凤凰棋牌app下载 众博棋牌 众博棋牌 众博棋牌 众鑫棋牌 凤凰棋牌游戏 众鑫棋牌app 众博棋牌